Rarraba Hanyoyin Aunawa na CMM

A Injin Auna Daidaito (CMM) na'ura ce da ake amfani da ita don auna yanayin wani abu daidai. Dangane da hanyoyin aunawa daban-daban, ana iya raba CMM zuwa rukunoni masu zuwa:

1. Tuntuɓi Bincike kayan aikin aunawa na daidaitawar aunawa (wanda aka fi amfani da shi a mafi yawan lokuta);

2. Kayan aikin auna daidaiton gani;

3. Kayan aikin aunawa na haɗakar Laser (wanda aka fi amfani da shi wajen auna samfura da kuma duba kwafin baya).

Daga cikinsu, ana amfani da hanyar auna hulɗa sau da yawa don auna samfuran da aka yi da injina, samfuran da aka matse, fina-finan ƙarfe, da sauransu. Domin yin nazarin bayanan sarrafa kayan aikin ko samar da ainihin bayanan kayan aikin don injiniyan baya, sau da yawa yana da mahimmanci a duba wuraren bayanai akan saman kayan aikin da ake gwadawa ta amfani da haɗin kai. Injin AunawaAikin duba bayanai na CMM shine amfani da shirin DMIS don tattara wuraren bayanai a wani yanki na musamman na saman abin da za a auna, wanda zai iya zama layi, saman, sashe na ɓangaren, lanƙwasa na ɓangaren ko layin kewaye a wani nisa daga gefen. Ana sanya abin da aka auna a cikin sararin aunawa na daidaitawa, ana iya samun matsayin daidaitawa na kowane wurin aunawa akan abin da aka auna, kuma ana iya ƙididdige girman, siffa da matsayin abin da aka auna bisa ga ƙimar daidaitawar sarari na waɗannan wuraren. Babban ƙa'idar ita ce a sami matsayin wurin sarari daban-daban na abin da aka auna ta hanyar daidaita firikwensin ganowa (bincike) da auna motsi na axis na sarari, sannan a kammala bincike da daidaita wuraren da aka auna (ƙungiyoyin maki) ta hanyar wasu lissafin lissafi, sannan a ƙarshe a dawo da abin da aka auna na lissafi, kuma a ƙididdige karkacewar da ke tsakaninsa da ƙimar ka'idar (ƙimar da aka ƙayyade) bisa wannan tushen. Don haka kammala binciken sassan da ake gwadawa.

Amfani da CMM daidai ya kamata ya kula da waɗannan abubuwan:

(1) Kafin a gyara kayan aikin, ya kamata a mayar da na'urar binciken zuwa asalin daidaitawa don ajiye babban sarari don wurin gyarawa; ɗaga kayan aikin ya kamata ya zama santsi, kuma ba zai iya shafar kowane ɓangare na kayan aikin ba CMM.

(2) Sanya sassan daidai, kuma tabbatar da cewa an cika buƙatun isothermal na sassan da injin aunawa kafin shigarwa.

(3) Kafa tsarin daidaitawa mai kyau don tabbatar da cewa tsarin daidaitawa da aka gina ya cika buƙatun zane-zanen domin tabbatar da daidaiton bayanan da aka auna.

(4) Lokacin da aka fara gudanar da shirin ta atomatik, ya zama dole a hana tsangwama tsakanin na'urar bincike da kayan aikin, don haka ya zama dole a kula da ƙara wurin juyawa.

Da fatan za a tuntuɓe mu idan akwai wasu tambayoyi ko shawara a overseas0711@vip.163.com