Menene Kuskuren Muhalli na Aunawa

Kuskuren yanayin aunawa yana nufin kuskuren da zafin jiki na waje, danshi, matsin lamba na iska, filin lantarki, girgiza, da haske suka haifar yayin aikin aunawa. An bayyana waɗannan:

1. Emuhalli Tdaular

Kuskuren auna tsayi E da kuskuren gano R kurakurai ne a ƙarƙashin takamaiman yanayi kafin isarwa, wanda kuma aka sani da kurakurai na asali. Mataki na farko a cikin yanayin muhalli shine zafin jiki na yanayi. Ana buƙatar zafin jiki na yanayi gabaɗaya ya kasance cikin 20°C ± 2°C, kuma zafin jiki na yanayi ba wai kawai yana buƙatar CMM da kanta ta kasance mai karko ba, har ma yana buƙatar sassan da aka auna su kasance masu karko. Saboda kayan ƙarfe suna shafar zafin jiki kuma za su haifar da faɗaɗa zafi da sanyi, tsawon ba iri ɗaya bane a yanayin zafi daban-daban.

2. Kumamuhalli Hdanshi

Ya kamata a sarrafa danshi a cikin 35 ~ 65%, danshi ba wai kawai yana shafar kuskuren aunawa ba, har ma yana lalata sassan lantarki na haɗin gwiwa sosai. Injin Aunawa. Sanya na'urar rage danshi a cikin CMM sannan ka tabbatar da cewa na'urar rage danshi ta dace da danshi na yanayi. Idan danshi ya yi ƙanƙanta, ƙasa da kashi 35%, kana buƙatar ƙara danshi ta yadda zai ɗan fi kashi 35%.

3. Akuma Palbarkatu

A ƙarƙashin sharuɗɗan amfani da CMM, matsin lamba dole ne ya kai wani ƙima. Saboda iskar da ke riƙe da CMM duk tana riƙe da iskar gas ne, ƙarancin matsin lamba na iska zai yi tasiri sosai ga kuskuren aunawa. Wasu masu amfani ba su san da yawa game da wannan ba, kuma masana'anta ne ke samar da iskar da ke samar da tashar matse iska ta gabaɗaya, wanda ke haifar da iska mai ƙarfi sosai.

4. Elantarki Field

Tasirin lantarki akan kayan aikin lantarki na CMM, saboda filin lantarki yana da babban canji, CMM zai haifar da kurakurai bazuwar. Saboda haka, bai kamata a sami na'urar canza wutar lantarki, injin EDM, juriyar mita, walda arc, walda ɗin kabu da sauran kayan aikin lantarki da maganadisu masu ƙarfi kusa da su ba. Injin Cmm ɗakin.

5. Muhalli A cikincin zarafi

Idan akwai tushen girgiza, zai kuma sa injin aunawa ya haifar da kurakurai, idan tushen girgiza ya bambanta, kuskuren ya bambanta. Saboda haka, ana buƙatar kayan aiki masu ƙarfi kamar injin da ba ya girgiza da injin bugawa.

6. Nihasken haske

Haske kuma matsala ce da ke tattare da yanayin zafi na yanayi, wanda yake da sauƙin yin watsi da shi, musamman idan babu rufin gida, ana sanya tagogi, kuma ana gina ɗakunan aunawa a kusurwar bango biyu da ke maƙwabtaka da shi. Zafin da ke cikin ɗakin kayan aiki ya bambanta a ƙarƙashin hasken rana, wanda ke haifar da kurakuran aunawa. Kada a kunna ɗakin kusa da wani ɓangare na na'urar aunawa ta daidaitawa.

Da fatan za a tuntuɓe mu idan akwai wasu tambayoyi ko shawara a overseas0711@vip.163.com